GLUE-HEATER Tank with Viscometer

QUALITY CONSTANCY FOR HOT GLUE PLANTS

Glue-heater tank equipped with helical electric mixer and viscometer in order to have a continuous glue viscosity constancy.
The structure, that is fully made of AISI 304 stainless steel, is resistant to corrosion caused water and glue.
The viscometer, that is mounted on board to the structure of the tank itself, it is made in Italy and it is made of stainless steel too.
It allows the automatic adjustment of the glue viscosity, acting when necessary, by adding a certain amount of solvent (usually water).
The sensor for the heating water level and the day-night working program are present.
It is fully insulated with a double chamber system. The void space is filled with ceramic insulator, in such a way to avoid accidental burnings during working.

Working:

• The glue in blocks is posed into the dedicated chamber;
• The three resistances, posed below the chambers, warm the heating water, making the glue fluid;
• The glue passes through a net going into the chamber where the electric mixer is posed;
• The glue that is now exiting from the tank, can be mixed with the water present in the next chamber via a tap, adjusting the hardness;
• So the glue is aspirated from the glue pump present on the gluing machine and directed to the viscometer, where the viscosity is measured;
• The glue exiting from the viscometer is now directed to the glue distributor posed at the gluing machine;
• The return pipe from the gluing machine is connected with a collection pot. To this comes the solvent hose coming from the viscometer too. The viscometer , if necessary, activate the solvent solenoid valve. In this way the glue viscosity is continuously controlled and adjusted.

Available also in the independent version, equipped with its electric switchboard and robust electro-welded stainless steel frame for an easy movement. With this version it is possible to feed more separated lines alternatively.